Main MenuMain Menu
Course Code: EEC 1030
522 Course Visits
UPS System & Battery Chargers: Maintenance & Troubleshooting
Course Sector:
Electrical Engineering
Course Dates and Locations
Choose a date and location to book your seat
No.
Date
Days
Location
Fees
Enrollment
01
5 Days
Manama, Bahrain $4,250
02
5 Days
Dubai, UAE $4,250
Introduction
Training course introducion / brief
In industrial process today, reliability of equipment is very important. Power supply must be able to cater the need of industrial process. In case of power failure, backup power supply system must be able to support the main process plant. This is to ensure smooth operation and product quality. In order to do this, uninterruptible power supply (UPS) system can be used to ensure the reliability, power quality (PQ), stability and consistency of the entire system.
There are often cases that the power back-up system is not well selected, incorrectly installed, operated, maintained, and in other cases do not work properly when needed and this failure caused losses in term of time and money to industries. A system that be able to monitor this power back-up system can detect any abnormal activities occurred to the system. In addition, the system can prevent any fault that may affect the whole operations.
The main purpose of this training course is to provide a practical detailed guidance for facilities engineers in selecting, installing, troubleshooting, and maintaining an uninterruptible power supply (UPS) system.
Course Objectives
At the end of the training course, participants will be able to
- UPS and control engineers and technicians.
- Plant Maintenance / Operators / Supervisor / Superintendent.
- Industrial Engineers.
- Technical maintenance employees.
- Electrical Engineer / Supervisor,
- Instrument Engineer / Supervisor, and
- Professional power system Engineers.
Course Audience
Who is this course for, and can benefit the most
- Circuits Engineer
- Design Engineer
- Electrical Controls Engineer
- Electrical Design Engineer
- Electrical Engineer
- Electrical Project Engineer
- Electronics-research engineer
- Instrumentation and Electrical (I&E) Reliability Engineer
- Power Systems Engineer
- Project Engineer
- Test Engineer
- illuminating engineer
- Technician, semiconductor development
- Power-distribution engineer
- Controls design engineer
Course Outline
The course aims and learning outcomes
Module (01) Improving Reliability and Power Quality with Standby Power Supplies
- 1.1 Introduction
- 1.2 Power supply Reliability
- 1.3 Classification of Power Quality Disturbances
- 1.4 Standby power supply devices
- 1.4.1 Duplicate Feeder from the Grid
- 1.4.2 Engine generating sets (EGS)
- 1.4.3 Battery storage
- 1.4.4 Uninterruptible power supply (UPS) systems
- 1.4.5 Energy sources
Module (02) UPS Configurations for 7 X 24 Continuous Power Facilities
- 2.1 Separating the Essential and Nonessential Loads
- 2.2 Special equipment to support continuous operation
- 2.3 Defining failure in a 7 × 24 facility
- 2.4 Reliability and availability as tools in evaluation of critical facilities
- 2.5 Critical distribution system configurations
- 2.6 Reliability and availability of critical distribution system configurations
Module (03) UPS Configurations for 7 X 24 Continuous Power Plants
- 3.1 Introduction
- 3.2 Typical configurations of UPS systems for power generating station loads
Module (04) Application Considerations
- 4.1 Charging Methods
- 4.2 Service Conditions
- 4.3 Equipment Rating
- 4.4 Output Ripple
- 4.5 Output Regulation
- 4.6 Fusing
- 4.7 Surge Voltage Withstand Capability
Module (05) UPS Selection
- 5.1 Determine the general need for an UPS.
- 5.2 Determine the purpose of the UPS.
- 5.3 Determine the power requirements.
- 5.4 Select the Type of UPS.
- 5.5 Determine if the safety of the selected UPS is acceptable.
- 5.6 Determine if the availability of the selected UPS is acceptable.
- 5.7 Determine if the selected UPS is maintainable.
- 5.8 Determine if the selected UPS is affordable
Module (06) Static UPS system ratings and size selection
- 6.1 Determining static UPS system rating.
- 6.2 Battery sizing
- 6.3 Computation sheets.
- 6.4 Static UPS system selection criteria.
Module (07) Rotary UPS system ratings and size selection
- 7.1 Determining rotary UPS system rating.
- 7.2 Motor and generator ratings.
- 7.3 Flywheel sizing.
- 7.4 Rotary UPS system selection criteria.
Module (08) Construction and installation of static UPS systems
- 8.1 Construction features of static systems.
- 8.2 Installation requirements.
Module (09) Construction and installation of rotary UPS systems
- 9.1 Construction features of rotary systems.
- 9.2 Installation requirements for rotary systems.
Module (10) Power distribution and
equipment grounding and shielding requirements
- 10.1 Power distribution equipment.
- 10.2 Grounding.
- 10.3 Computer power centers.
- 10.4 Shielding.
- 10.5 Radio frequency interference (RFI).
- 10.6 Noise and noise reduction methods.
Module (11) Testing and start-up
- 11.1 Installation inspection.
- 11.2 Individual component testing.
- 11.3 Visual and electrical wiring inspections.
- 11.4 Energizing and test of the UPS system.
- 11.5 Test forms.
- 11.6 Troubleshooting - Possible failures and corrective actions.
Module (12) Test equipment
- 12.1 Use of maintenance personnel.
- 12.2 Use of diagnostics.
- 12.3 Suggested lists of test equipment and accessories.
Module (13) Types of Maintenance
- 13.1 Maintenance for UPS systems
- 13.1.1 Safety.
- 13.1.2 Preventive maintenance.
- 13.1.3 Corrective maintenance
- 13.1.4 Recognizing impending problems.
- 13.1.5 Troubleshooting.
- 13.1.6 Spare parts availability.
- 13.2 UPS battery maintenance
- 13.2.1 Maintenance costs.
- 13.2.2 Maintenance access.
- 13.2.3 Preventive maintenance.
- 13.2.4 Maintenance procedures.
- 13.2.5 Maintaining flooded lead-acid cells.
- 13.2.6 Maintenance considerations.
- 13.2.7 Maintaining valve-regulated lead-acid cells.
- 13.2.8 Ni-cad cells.
- 13.2.9 Safety.
Providers and Associations
Providing the best training services and benefits to our valued clients
Boost certificate of completion
BOOST's Professional Attendance Certificate “BPAC” is always given to the delegates after completing the training course, and depends on their attendance of the program at a rate of no less than 80%, besides their active participation and engagement during the program sessions.
ENDORSED EDUCATION PROVIDER
Flexible deadlines
Customized dates accordance to your schedule
Shareable Certificate
Earn certificate upon completion
COURSE METHODOLOGY
Our Training programs are implemented by combining the participants' academic knowledge and practical practice (30% theoretical / 70% practical activities).
At The end of the training program, Participants are involved in practical workshop to show their skills in applying what they were trained for. A detailed report is submitted to each participant and the training department in the organization on the results of the participant's performance and the return on training. Our programs focus on exercises, case studies, and individual and group presentations.
Since 2001, we have been pioneering the training field in the middle east, we managed to unlock potential and help individuals, teams and organisations to be the best that they can be with our full and integrated solutions.
Quick Links
Our sister companies in Egypt and United Arab Emirates
MOST TRENDING
And Recommended Training Courses
trending
The Business Analyst (PBA) - PMI Certified
Date: Dec 15, 2025
Location:Dubai, UAE
trending
Certified Business Analysis Professional- IIBA
Date: Sep 1, 2025
Location:Dubai, UAE
trending
The Risk Management Professional (PMI-RMP Exam Preparation)
Date: Jun 30, 2025
Location:Istanbul, Turkey
We believe in progress for everyone.
We helped more than 10.000 clients over 20 countries on 4 continents in boosting their knowledge, skills and careers.
Boost Training And Consulting © All Copyrights Reserved 2025