Main MenuMain Menu
Course Code: MEC 107
513 Course Visits
HVAC System Utilization, Operation & Effective Maintenance Strategies
Course Sector:
Mechanical Engineering
Course Dates and Locations
Choose a date and location to book your seat
No.
Date
Days
Location
Fees
Enrollment
01
5 Days
Abu Dhabi, UAE $4,250
02
5 Days
Online, Virtual $2,150
03
5 Days
Salalah, Oman $4,250
04
5 Days
Jeddah, KSA $4,250
Introduction
Training course introducion / brief
Either it is a small warehouse or a complex high-rise building, there is an increasing demand by Owners and Engineers to design and install the HVACR Systems in a more Efficient and Cost-Effective manner. Due to the on-going advances in HVACR Technology, this demand is becoming a must and often controlled by New Governmental Regulations and Engineering Codes.
The details of Heat Load Calculations, Selection of appropriate Equipment/System and the design of the Ducts and Piping Networks. A comprehensive design case study of a complete cold store including heat loads of individual rooms and the total Cold Store, Selection of the appropriate equipment, design of the best layout including handling areas.
Troubleshooting Technique
This course is designed specially to improve the Knowledge of Refrigeration and Air Conditioning Personnel as mostly forgotten or have not applied it in the field. Also to develop & improve the Troubleshooting Technique for the HVACR personnel to maintain the Effective & Efficient Equipment. It will explain the latest and old model HVACR equipment’s comparison and the difference in the Service Technique.
The course train the participants in Electrical Field, Inspection and Troubleshooting techniques related to mechanical portion of the HVACR Equipment. Also will cover all aspects of HVACR Operation. Maintenance & logging system to find out the efficiency of the entire system. This will help to cut down power consumption and operational cost of the HVACR system.
Course Objectives
At the end of the training course, participants will be able to
- Learn the Principles of Refrigeration Cycle
- Learn the Principles of Air-Conditioning
- Identify and test the Special tools & equipment’s
- Learn about HVACR Preventive & Corrective maintenance
- The Ozone depletion and global warming potential
- Gain knowledge about replacement refrigerants
- Know the New Refrigerants effects on Old Equipment’s
- Learn the Servicing of Chilled water system
- Learn the Electrical circuits In HVACR
- Learn troubleshooting and fault findings
- Learn diagnosis, repairs and Servicing
Course Audience
Who is this course for, and can benefit the most
- Automotive Engineer
- Boiler Engineer
- Ceramics Engineer
- Equipment Engineer
- High-Pressure Engineer
- Marine Engineer
- Mechanical Design Engineer
- Mechanical Engineer
- Naval Architect
- Pipeline Engineer
- Power Engineer
- Rotating Equipment Engineer
- Senior Mechanical Engineer
- Turbine Engineer
- Validation Engineer
Course Outline
The course aims and learning outcomes
Module (01) Principles of HVACR
- 1.1 Fundamentals of HVACR
- 1.2 Refrigeration Cycle
- 1.3 Parts of Refrigeration Cycle
- 1.4 What is Air Conditioning?
- 1.5 Air Conditioning Cycle
- 1.6 Major Parts of Air Conditioning
- 1.7 Different Types of HVACR Systems
- 1.8 Mechanical & Chemical Cooling Systems
- 1.9 Mechanical Controls Temperature and Humidity
Module (02) Serviceman Tools & Equipment
- 2.1 Vacuum Pump and Charging Cylinder
- 2.2 Manifold Gauge and Brazing Equipment
- 2.3 Pinch-off Tool Capable
- 2.4 Leak detector and Tubing Cutter
- 2.5 Hand Tools to Remove Components
- 2.6 Digital clamp-on Meter and Thermometer
- 2.7 Pliers and Clippers
- 2.8 Soldering& brazing Equipment
- 2.9 Air Velocity measuring Instrument
Module (03) Refrigerants & Ozone Depletion
- 3.1 Ozone Depletion
- 3.2 Global Warming Potential
- 3.3 New and Replacement Refrigerants
- 3.4 Reclaiming the Refrigerant
- 3.5 Changing the Refrigerant
- 3.6 Compressor Lubricating Oils
- 3.7 Refrigerant Leak Detection
- 3.8 Dye Systems
- 3.9 Equipment Test Pressures
- 3.10 Methods of Leak Testing
- 3.11 Pressure Leak Testing
- 3.12 Handling Refrigerants: Safety Precautions
Module (4) Servicing of HVACR Equipment
- 4.1 Service Valves and Gauges
- 4.2 Service Gauge Manifold
- 4.3 Fitting and Removing Gauges
- 4.4 Refrigerant PT Charts
- 4.5 Pumping down
- 4.6 Pumping down and charging
- 4.7 Adding & Removing Refrigerants
- 4.8 Vapor Charging
- 4.9 Liquid Charging
- 4.10 Future of used Refrigerants
Module (05) HVACR Diagnosis and Repairs
- 5.1 Evaporator Icing
- 5.2 Slugging at Compressor
- 5.3 Compressor Efficiency Test
- 5.4 Metering Devices and Defects
- 5.5 Replacing a Thermostatic Expansion Valve
- 5.6 Replacing the Filter Drier
- 5.7 Sight glass or Moisture Indicator
- 5.8 Moisture in the System
- 5.9 Compressor Overhauling
- 5.10 Excessive Operating Head Pressure
- 5.11 Compressor Motor burn-out: System Flushing
Module (06) Electrical Circuits for HVACR
- 6.1 Basic Electrical
- 6.2 Understanding of Electrical Symbols
- 6.3 Safety Precautions
- 6.4 Fuses & Circuit Breakers
- 6.5 Disconnect Switches
- 6.6 Ground-Fault circuit interrupters
- 6.7 Solenoid Valve and Relay
- 6.8 Compressor Motor Starting Methods
- 6.9 Contactors & Relays
- 6.10 Electrical circuit’s legends
- 6.11 Electrical Component Arrangements
- 6.12 Control & Power Diagrams
- 6.13 Sequence of Operation
- 6.14 Set Points
Module (07) Inspection & Maintenance of HVACR
- 7.1 What is the Maintenance?
- 7.2 Types of maintenance
- 7.3 Routine inspection
- 7.4 Preventive maintenance in HVACR systems
- 7.5 Corrective Maintenance for HVACR system
- 7.6 What should to do when season begin?
- 7.7 What to do during season?
- 7.8 What should to do during off-season?
- 7.9 HVACR Operation and Maintenance Log Sheets
Providers and Associations
Providing the best training services and benefits to our valued clients
Boost certificate of completion
BOOST's Professional Attendance Certificate “BPAC” is always given to the delegates after completing the training course, and depends on their attendance of the program at a rate of no less than 80%, besides their active participation and engagement during the program sessions.
ENDORSED EDUCATION PROVIDER
Flexible deadlines
Customized dates accordance to your schedule
Shareable Certificate
Earn certificate upon completion
COURSE METHODOLOGY
Our Training programs are implemented by combining the participants' academic knowledge and practical practice (30% theoretical / 70% practical activities).
At The end of the training program, Participants are involved in practical workshop to show their skills in applying what they were trained for. A detailed report is submitted to each participant and the training department in the organization on the results of the participant's performance and the return on training. Our programs focus on exercises, case studies, and individual and group presentations.
Since 2001, we have been pioneering the training field in the middle east, we managed to unlock potential and help individuals, teams and organisations to be the best that they can be with our full and integrated solutions.
Quick Links
Our sister companies in Egypt and United Arab Emirates
MOST TRENDING
And Recommended Training Courses
trending
The Business Analyst (PBA) - PMI Certified
Date: Dec 15, 2025
Location:Dubai, UAE
trending
The Risk Management Professional (PMI-RMP Exam Preparation)
Date: Jun 30, 2025
Location:Istanbul, Turkey
trending
The Scheduling Professional (PMI-SP Exam Preparation)
Date: Feb 10, 2025
Location:Dubai, UAE
We believe in progress for everyone.
We helped more than 10.000 clients over 20 countries on 4 continents in boosting their knowledge, skills and careers.
Boost Training And Consulting © All Copyrights Reserved 2025