Main MenuMain Menu
Course Code: MEC 128
760 Course Visits
Steam Power Plant Layout System & Equipment Operation
Course Sector:
Mechanical Engineering
Course Dates and Locations
Choose a date and location to book your seat
No.
Date
Days
Location
Fees
Enrollment
01
5 Days
Dubai, UAE $4,250
02
5 Days
Dubai, UAE $4,250
Introduction
Training course introducion / brief
This course is devoted to present the different systems in a steam power
plant and its components. Main steam and auxiliary systems necessary
for operation is discussed in detail. The details and sequence of
start-up and operating these systems and its components is also
discussed. The proper understanding of functions and operation of
different systems will be beneficial to the overall performance of the
plant and will thus reduce emergency trip and hazardous situations.
Course Objectives
At the end of the training course, participants will be able to
- Major and Auxiliary components in a steam power plant.
- Function and operation of different equipment’s in the plant.
- Layout and circuits of different systems in the plant.
- Safety and trip functions in the plant.
- Start up of auxiliary systems.
- Start up of main steam systems.
- Start up of main and auxiliary components.
Course Audience
Who is this course for, and can benefit the most
- Automotive Engineer
- Boiler Engineer
- Ceramics Engineer
- Equipment Engineer
- High-Pressure Engineer
- Marine Engineer
- Mechanical Design Engineer
- Mechanical Engineer
- Naval Architect
- Pipeline Engineer
- Power Engineer
- Rotating Equipment Engineer
- Senior Mechanical Engineer
- Turbine Engineer
- Validation Engineer
Course Outline
The course aims and learning outcomes
Module (01) Introduction and Common Auxiliary Systems
- 1.0 Raw Water Supply Desalination & Demineralized Water System
- 1.2 Instrument & Service Air System
- 1.3 Closed Cooling Water System
- 1.4 Auxiliary Steam System
Module (02) Fuel and Air Systems
- 2.1 Fuel Gas System
- 2.1.1 Igniter Header and Level Safety Shutoff Valves
- 2.1.2 Main Fuel Gas Safety Shutoff Valve
- 2.2 Light Oil System
- 2.2.1 Function and Description
- 2.2.2 Start up
- 2.3 Heavy Oil System
- 2.3.1 Fuel Oil Combustion System: Heavy Oil Day Tank
- 2.3.2 Heavy Oil Day Tank Suction Heater
- 2.3.3 Fuel Oil Burner Heaters
- 2.3.4 Fuel Oil Burner Supply Pumps
- 2.3.5 Fuel Oil Burner Pumps Suction Strainers
- 2.3.6 Fuel Oil Safety Shutoff Valves
- 2.3.7 Fuel Oil Control Valves
- 2.3.8 BMS Control and Operations
- 2.3.9 Safety Shutdown
- 2.4 Air and Gas Circuit
- 2.4.1 Fuel and Air Control system
- 2.4.2 BMS Operational Overview
- 2.4.3 Light Up (Cold Condition)
- 2.4.4 Check list
- 2.4.5 Furnace Boiler Purge
- 2.4.6 Fuel Leak Control Test
- 2.4.7 First Burner Light Up
Module (03) Boiler Start Up Systems and Procedure
- 3.1 Boiler Descriptions
- 3.2 Boiler Filling
- 3.3 Boiler Feed water System
- 3.4 Drum, SH and RH Protections
- 3.5 Pressure Raise
- 3.6 Boiler Load Increase
- 3.7 Chemical Parameters
- 3.8 Boiler Start Up Curves
- 3.8.1 Cold Start Up Curve
- 3.8.2 Warm Start Up Curve
- 3.8.3 Hot Start Up Curve
Module (04) Turbine Start Up Systems and Procedure
- 4.1 Steam Turbine Description
- 4.2 Turbine Auxiliary Circuits
- 4.3 Turbine Oil System
- 4.3.1 Lubrication oil system
- 4.3.2 Electro hydraulic control oil system
- 4.4 Turbine control system
- 4.4.1 “On-Off Control” Actuators
- 4.4.2 “Proportional Control” Actuators
- 4.4.3 Actuator Servo Valve
- 4.4.4 Auto stop oil / Emergency trip oil
- 4.5 Gland Sealing Steam System
- 4.6 Turbine Bypass System
- 4.7 Steam Turbine Start-Up Procedure
- 4.7.1 Preparation For Rolling
- 4.7.2 Start High Pressure Fluid System
- 4.7.3 Steam Rolling and Loading
- 4.8 Turbine Start Up Curves
- 4.8.1 Cold start up curve
- 4.8.2 Hot start up curve
- 4.8.3 Turbine Start Up Schedule
Module (05) Condensate System
- 5.1 Steam Surface Condenser
- 5.2 Condenser Hotwell Level gauge
- 5.3 Vacuum Breakers
- 5.4 Condensate Pumps
- 5.6 Condensate Pump Check Valve
- 5.7 Condensate Storage Tank
- 5.8 Condensate Transfer Pump
- 5.9 Condensate Supply Pumps
- 5.10 Condenser vacuum systems
- 5.11 The Liquid Ring Pump
- 5.12 Ejector System
- 5.13 Gland Steam Condenser
- 5.14 Low Pressure Feedwater Heaters
- 5.15 Deareator
Module (06) Generator Start Up Systems and Procedure
- 6.1 Description 6.2 Auxiliary Circuits
- 6.2.1 Service Gas System
- 6.3 Generator Gland Seals (Hydrogen Seals)
- 6.3.1 Air Side Seal Oil System
- 6.3.2 Hydrogen Side Seal Oil System
- 6.3.3 Seal Oil Backup
- 6.3.4 Seal Oil Coolers
- 6.3.5 Differential Pressure Regulator for AC Air-side Seal oil pump
- 6.4 Closed Circuit Cooling Water System
- 6.4.1 Stator-Coil Cooling Water System
- 6.5 Generator Start Up Sequence
- 6.5.1 DRYING 6.5.2 Leakage Test
- 6.5.3 Inspection of Phase
- 6.5.4 Initial start
- 6.5.5 Start Up
- 6.5.6 Synchronization To The Line
Providers and Associations
Providing the best training services and benefits to our valued clients
Boost certificate of completion
BOOST's Professional Attendance Certificate “BPAC” is always given to the delegates after completing the training course, and depends on their attendance of the program at a rate of no less than 80%, besides their active participation and engagement during the program sessions.
ENDORSED EDUCATION PROVIDER
Flexible deadlines
Customized dates accordance to your schedule
Shareable Certificate
Earn certificate upon completion
COURSE METHODOLOGY
Our Training programs are implemented by combining the participants' academic knowledge and practical practice (30% theoretical / 70% practical activities).
At The end of the training program, Participants are involved in practical workshop to show their skills in applying what they were trained for. A detailed report is submitted to each participant and the training department in the organization on the results of the participant's performance and the return on training. Our programs focus on exercises, case studies, and individual and group presentations.
Since 2001, we have been pioneering the training field in the middle east, we managed to unlock potential and help individuals, teams and organisations to be the best that they can be with our full and integrated solutions.
Quick Links
Our sister companies in Egypt and United Arab Emirates
MOST TRENDING
And Recommended Training Courses
trending
OSHA: Occupational Safety and Health Administration Standards
Date: Apr 13, 2025
Location:Riyadh, KSA
trending
Happiness To Have and Hold
Date: Nov 24, 2025
Location:Dubai, UAE
trending
Introduction to Machine Learning and Artificial Intelligence
Date: Sep 1, 2025
Location:Abu Dhabi, UAE
We believe in progress for everyone.
We helped more than 10.000 clients over 20 countries on 4 continents in boosting their knowledge, skills and careers.
Boost Training And Consulting © All Copyrights Reserved 2025